Description
The Spinpro-E9N is a Speed Programmer and Controller with energy monitor for spinning machines. The Speed Change over is done based on the length of the yarn produced.
Spinpro-E9N helps to improve the production and also reduce the end breakages. Energy Measurement helps to optimize the production with energy consumption.
Model: Spinpro-E9N
Salient Features:
- Production in Hanks (shift wise and total), production in Kg (shift wise), Spindle Speed, delivery speed, Production rate, TPI, TPM, Runtime and Downtime (shift wise and total) can be monitored.
- Voltage, current, frequency, Power factor, Total KW, Total KVA, Unit/Kg (shift wise), Energy consumption (shift wise and total).
- CAM position can be sensed to start new doff.
- Ten speed patterns can be preprogrammed for different counts.
- Speed pattern can be set up to 25 steps.
- Password protection to avoid unauthorized settings.
- Programmable compulsory slow speed and time.
- Programmable delay time for power on slow speed.
- Programmable acceleration / deceleration time reduces yarn breaks [only for inverter drive type].
- Pre Doff and final Doff indication.
- Centralized computer control through RS485 communication.
- TPI / TPM setting facility.
- Special program for ring traveler with maximum of 5 steps.
- External switch is available to run the machine in compulsory slow speed.
- Shift wise and total doff can be monitored in view menu.
Technical Specifications:
Parameter | Spinpro-E9N |
---|---|
Input Supply Voltage | 90-260V AC, 50Hz |
Current Consumption | 50mA(Max) |
Inputs | Inductive Type Proximity switch 3 numbers |
Rating of the Proximity Switch | 12V NPN Type |
Output | 3 No of Potential free Contacts (NO , COM, NC) 1 Potential free contact(NO, COM) |
Relay Contact Rating | C-NO-NC Potential Free Contacts. 1A at 230V AC |
Display | 16 character 2 line LCD Display with Backlight |
Panel Cutout | 145mm x 85 mm |
Dimension | 160mm(L) x 104mm (H) x 150mm(D) |
Reviews
There are no reviews yet.